serach

John Wood Tankless Water Heater

Model : Envirosense Power Vent 90% Efficient Gas Water Heater

Brand : John Wood
Product Description : The Envirosense Power Vent is an ENERGY STAR qualified, 50-gallon, 76,000 BTU gas water heater, equipped with a fully submerged, spiral-shaped condensing heat exchanger. This design provides much greater heat transfer surface than a standard straight flue tube, resulting in 90% thermal efficiency and higher hot water output than standard 78% efficient water heaters. With a 22" diameter, Envirosense Power Vent can be installed in less space than a 75-gallon unit and delivers greater recovery and lower operating costs. The Envirosense Power Vent is so advanced, it can deliver endless hot water shower after shower... at a continuous flow of over 3 gallons per minute.*

POWER VENT DESIGN FOR INSTALLATION VERSATILITY

- Modular blower, with 120V, 60Hz electrical system (5 amps or less), 6-foot cord with standard 3-prong connector
- Combined horizontal and vertical vent runs terminating through outside wall, using ULC S636 PVC, CPVC or polypropylene pipe as follows:
- 2 ? pipe allows vent runs up to 25 equivalent feet
- 3 ? pipe allows vent runs up to 65 equivalent feet
- 4 ? pipe allows vent runs up to 120 equivalent feet
- Supplied with PVC pipe and elbows to connect heat exchanger outlet to blower, including condensate elbow and drain, and ULC S636 PVC Vent Attenuation Assembly (VAA)

SIDE-MOUNTED TAPS FOR RECIRCULATING SYSTEMS

- Hot and cold "side taps" allow the Envirosense Power Vent to be used for "combination" systems for water heating plus space heating, radiant floor heating or other applications requiring a recirculating hot water loop
- Plugs for recirculating taps are shipped with water heater

INTELLI-VENT GAS CONTROL WITH SILICON NITRIDE HOT SURFACE IGNITER

- Premium-grade hot surface igniter eliminates standing pilot
- Electronic circuitry provides superior system diagnostic capabilities plus extremely precise temperature control

COMMERCIAL-GRADE GLASS LINING WITH TWO MAGNESIUM ANODE RODS

- Superior protection against tank corrosion
- Glass lining protects all "water side" tank surfaces plus inside of internal heat exchanger exposed to condensate

DIFFUSER DIP TUBE

- Helps reduce lime and sediment buildup, maximize hot water output
- Cross-link polymer withstands long-term exposure to temperatures up to 400F

SIX-YEAR LIMITED PARTS AND TANK WARRANTY

- Consult written warranty shipped with water heater or contact
- GSW for complete warranty information

AVAILABLE IN NATURAL GAS ONLY

- * 3.07 GPM continuous flow, based on 65F/18C inlet water temperature and 110F/43C outlet water temperature.

SPECIFICATIONS

- MODEL NUMBER : 6G5076NVC-02
- BTU INPUT PER HOUR : 76,000
- TANK SIZE GALLONS (LITRES) : 50(189)
- FIRST HOUR DELIVERY GALLONS (LITRES) : 127 (481)
- RECOVERY - GALLONS (LITRES) PER HOUR AT 90F/50C RISE : 92 (347)
- SHIPPING WEIGHT LB (KG) : 210 (95)

Natural gas only

- High-altitude model (5,300 - 10,700 ft) available: replace '02' with '04'

Copyright © 2018 CosmoPolitanHeating Services Inc. All rights reserved.